车用柴油机电控开发系统的软,硬件设计及应用

本文研制了一种新的发动机电 控燃油系统的开发系统的微机测控系统。     

采用排气循环技术改善车用柴油机NOx的排放特性

在增压中冷直喷式柴油机上，通过采用排气再循环（ＥＧＲ）的技术措施，分析研究了ＥＧＲ在不同条件下对柴油机ＮＯｘ的排放特性及其工作过程的影响，指出了ＥＧＲ抑制ＮＯｘ排放量的原理和具体效率。     

缸内直喷天然气发动机开闭环控制系统的研究

本文介绍了天然气发动机采用缸内直接喷气技术时供气与点火控制系统的设计，实现了开闭环相结合的控制方式，并进行了试验验证。     

基于人工神经网络的柴油机故障诊断

故障诊断是计算机模式识别领域的一个活跃课题。文中提出了基于人工神经网络的柴油机故障诊断方法，设计了适合该诊断系统的BP网络结构，并给出了一种基于黄金分割法改进的BP算法，用来自适应调整网络学习速率。仿真结果表明：该算法具有很快的学习速度和较高的学习精度，完全适用于柴油机故障诊断系统。     

内燃机活塞-缸套-活塞环系统工作状态的识别方法

提出了一种基于证据理论方法的内燃机活塞—缸套—活塞环系统工作状态的识别方法。通过搭建试验台架,从实车试验中获取曲轴箱压力信号和机身振动加速度信号;提取试验特征值,组建模型样本和试验样本,并运用证据理论信息融合方法对内燃机的工作状态进行识别。研究结果表明:应用证据理论信息融合方法融合曲轴箱压力信号和机身振动加速度信号,进而识别活塞—缸套—活塞环系统的工作状态这一方法有效、可行。     

催化控制技术在二冲程通用小型汽油机上的应用

二冲程通用小型汽油机在非道路机械应用广泛,但排放不能满足EPA和欧盟标准,制约着发展。在解决二冲程通用小型汽油机排放的技术方案中,催化转化技术是目前的主流技术。     

使用乙醇还原剂的NOx-SCR催化剂的性能评价

采用计算机辅助分析的方法设计了乙醇还原剂添加装置，并使用这套装置在发动机台架上进行了稀燃NOx选择催化还原（SCR）催化剂的性能评价试验。试验结果表明，在30000h^-1空速、排温为350～420℃范围的条件下，该催化剂的NOx转化率维持在90％以上，而在低温和高温下的转化率较低；随着乙醇添加量的增加，催化剂NOx转化率提高，但同时会增加THC排放；当空速超过40000h^-1后，催化剂性能有所下降。     

Analysis of occupational accidents encountered by deck cadets in maritime transportation

The 2010 Manila amendments to the Standards of Training, Certification and Watchkeeping Code (STCW) was adopted by the idea to render the profession more attractive to the seafarers, particularly to cadets. It is possible to ensure greater attraction only by providing suitable and safe working conditions on board to cadets. This study analyses occupational accidents and near misses encountered by ocean going deck cadets, who received A-II/I training, during their sea training. The aim of this study was to determine causal factors influencing work accidents and to propose several recommendations for the safety of deck cadets. A total of 857 officer candidates, who received maritime education at university level in Turkey, were interviewed. The Analytic Hierarchy Process (AHP) method was used in the study to analyse the occupational accidents. As a result of this study on deck cadets, the most risky areas for work accidents were found to be the deck (39.9%), cargo areas (35.7%), areas used for manoeuvring operations (including winch areas and areas in which berthing, unberthing, and anchoring operations take place) (16.1%), and accommodation areas (8.3%). The most important root causes for occupational accidents were identified as not using personal protective equipment (24.2%), haste (22.6%), and presence in inappropriate places (13.6%). This study offers some important insight into the prevention of occupational accidents, and includes suggestions and advisory opinions of sector representatives. As a result of this study, several recommendations for the prevention of accidents are proposed.     

Transport energy consumption in mountainous roads. A comparative case study for internal combustion engines and electric vehicles in Andorra

This paper analyses transport energy consumption of conventional and electric vehicles in mountainous roads. A standard round trip in Andorra has been modelled in order to characterise vehicle dynamics in hilly regions. Two conventional diesel vehicles and their electric-equivalent models have been simulated and their performances have been compared. Six scenarios have been simulated to study the effects of factors such as orography, traffic congestion and driving style. The European fuel consumption and emissions test and Artemis urban driving cycles, representative of European driving cycles, have also been included in the comparative analysis. The results show that road grade has a major impact on fuel economy, although it affects consumption in different levels depending on the technology analysed. Electric vehicles are less affected by this factor as opposed to conventional vehicles, increasing the potential energy savings in a hypothetical electrification of the car fleet. However, electric vehicle range in mountainous terrains is lower compared to that estimated by manufacturers, a fact that could adversely affect a massive adoption of electric cars in the short term.     

相继增压系统对改善船用直列八缸发动机性能的试验研究

随着大型柴油发动机经济性和排放要求的不断提升,以及对发动机稳态、瞬态特性要求的不断提高,传统的涡轮增压系统已无法满足船用发动机全工况性能的要求。为了提高产品竞争力和适配性,针对某8缸直列船用柴油发动机开发了带有定压排气管的相继增压系统,并进行了发动机台架试验研究。结果表明：发动机中、低转速时,相继增压系统使发动机比油耗可以下降5%-10%,排气温度降低30%-45%,烟度下降55%-60%；最大扭矩可以提升15.1%-36.4%；发动机最大扭矩转速工况突加突卸响应性提升约28%-29%；相继增压系统中定压排气管的设计使得发动机高工况性能也有所提升,从而实现发动机全工况性能的提升。